The majority of air-conditioners and heatpumps offered all over the world utilize a refrigerant called R-22. Emissions of R-22 are considered by some specialists to be a substantial part of diminishing the ozone layer that protects animals and individuals from damaging rays from the sun.
Families now have the option to ask for an air-conditioner or heat pump that uses a more efficient and environmentally friendlier refrigerant called 410A or R-410 when purchasing a new system for their home.
If your system ever leaks, the escaping refrigerant won’t contribute to ozone exhaustion! Why can’t R-410A affect the ozone layer? R-410A is not a CFC or an HCFC.
When your system requires to be repaired in a few years, you avoid the threat that R-22 could become hard or pricey to get. The old refrigerant R-22 will be phased out together with other ozone depleting chemicals, and both supply and demand of this chemical will be substantially affected by existing and approaching policies. By choosing an air conditioning unit or heatpump that uses R-410A, you will prevent the threat connected with buying a product that is destined to become obsolete.
The heart of every air conditioner or heat pump is the compressor, and newer Systems are specifically designed to utilize R-410A refrigerant. R-410A can release and absorb heat more effectively than R-22 ever could, compressors with R-410A run cooler than R-22 systems, decreasing the danger of burnout due to overheating.
R-22 air conditioners utilize an oil understood as “mineral oil” that has actually been utilized for years. R-410A air conditioners use more recent synthetic lubricants that are generally more soluble with the R-410A than the old mineral oils are with the older R-22 refrigerants. Just as lots of new cars utilize synthetic oils because they are less most likely to break down under high stress and heat, the new artificial oils utilized in R-410A air conditioners are less most likely to break down under severe conditions.
R-410A offers some wonderful benefits, but it required the producers of air conditioning units to redesign their products to benefit from the characteristics of the refrigerant. The reason that a refrigerant works is since it captures the heat from one place, and then releases the heat elsewhere. R-410A captures heat and then releases it much better than R-22 did, so manufacturers have found that they need less refrigerant in an R-410A a/c unit than they required in an R-22 air conditioner. Because there’s less refrigerant, they need less copper tubing, and typically can utilize a smaller compressor. The bad news was that R-410A could not be utilized in a/c that were made to use R-22, but the advantages for new air conditioning systems were undue to skip.
It’s apparent that air conditioning systems manufactured for using R-410A are more efficient, more dependable, and may even be less costly then the older units that still utilize R-22. Compare the SEER or EER scores and the ENERGY STAR rating to be sure.
For more info give these professionals a call for a brand new air conditioning unit or these services:
Summary
R-410A can absorb and give of heat more efficiently than R-22 ever could, compressors with R-410A run cooler than R-22 systems, decreasing the danger of burnout due to overheating.
